Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Install the front suspension support sub-assembly as shown in the illustration.
HINT: Check that the slots on the piston rod and front suspension support sub-assembly are aligned.
(b) Temporarily tighten a new front suspension support nut.
9. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Install the front shock absorber with coil spring (upper side) with the nut and 2 spacers.
Text in Illustration
Torque: 85 Nm (866 kgf-cm, 63ft-lbf)
(b) Install the front shock absorber with coil spring (lower side) to the steering knuckle and insert the 2 bolts and 2 nuts.
Torque: 290 Nm (2956 kgf-cm, 214ft-lbf)
NOTICE: When installing the nuts, keep the bolts from rotating.
10. INSTALL FRONT STABILIZER LINK ASSEMBLY