Venza FWD L4-2.7L (1AR-FE) (2009)
Wheel Fastener: Service and Repair
Front Axle Hub Bolt
Components
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: COMPONENTS
COMPONENTS
ILLUSTRATION
Replacement
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT
REPLACEMENT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY
(a) Remove the 2 bolts and separate the front disc brake caliper assembly.
NOTICE: Use wire or an equivalent tool to keep the front disc brake caliper assembly from hanging down by the flexible hose.
3. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Front Brake/Removal
4. REMOVE FRONT AXLE HUB BOLT