Venza FWD L4-2.7L (1AR-FE) (2009)
(h) Using a 6 mm hexagon socket wrench, install a new gasket and the overflow plug to the automatic transaxle.
Test in Illustration
Torque: 40 Nm (408 kgf-cm, 30ft-lbf)
(i) Install a new gasket and the refill plug to the automatic transaxle.
Torque: 49 Nm (500 kgf-cm, 36ft-lbf)
2. REMOVE FRONT DRIVE SHAFT ASSEMBLY
HINT: See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Removal.
3. REMOVE TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the transaxle case oil seal.
SST: 09308-00010
4. REMOVE FRONT TRANSAXLE CASE OIL SEAL