Venza FWD L4-2.7L (1AR-FE) (2009)
Transmission Speed Sensor: Service and Repair
Installation
U760E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL SPEED SENSOR
(a) Install the speed sensor to the valve body with the 2 bolts.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
(b) Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and
Replacement/Installation
5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Service and Repair/Removal and Replacement/Installation
6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" See: Service and
Repair/Removal and Replacement/Installation.