Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1296004.png)
Test in Illustration
If the result is not as specified, replace the shift lock control unit assembly.
4. INSPECT SHIFT LOCK SOLENOID
(a) Disconnect the shift lock solenoid connector.
(b) Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
Test in Illustration
Standard Resistance:
If the result is not as specified, replace the shift lock control unit assembly.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Test in Illustration
If the result is not as specified, replace the shift lock control unit assembly.
