Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1314005.png)
(a) Coat the shift solenoid valve SL1 with ATF.
Text in Illustration
(b) Install the shift solenoid valve SL1 to the valve body assembly.
6. INSTALL SHIFT SOLENOID VALVE SL2
(a) Coat the shift solenoid valve SL2 with ATF.
(b) Install the shift solenoid valve SL2, clamp and lock plate to the valve body assembly with the 2 bolts.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
7. INSTALL SHIFT SOLENOID VALVE SL
(a) Coat the shift solenoid valve SL with ATF.
Text in Illustration
(b) Install the shift solenoid valve SL to the valve body assembly with the bolt.
8. INSTALL TRANSMISSION WIRE See: Wiring Harness/Service and Repair/Installation
9. INSTALL SPEED SENSOR See: Sensors and Switches - A/T/Transmission Speed Sensor/Service and Repair/Installation
