Venza FWD L4-2.7L (1AR-FE) (2009)
Axle Shaft Assembly: Component Tests and General Diagnostics
DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT FRONT DRIVE SHAFT ASSEMBLY
(a) Check whether the drive shaft dimensions are within the following specifications.
HINT: The following table shows the dimension (A) of the drive shaft.
Dimension (A) for 1AR-FE
Dimension (A) for 2AR-FE
(b) Check that there is no excessive play in the outboard joint.
(c) Check that the inboard joint slides smoothly in the thrust direction.
(d) Check that there is no excessive play in the radial direction of the inboard joint.
(e) Check the boots for damage.