Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Disengage the 2 claws and remove the power window regulator switch assembly.
Installation
WINDOW / GLASS: REAR POWER WINDOW SWITCH: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws and install the power window regulator switch assembly.
2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL See: Body and
Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly