Venza FWD L4-2.7L (1AR-FE) (2009)
Liftgate Window Glass: Service and Repair
Removal
WINDOW / GLASS: BACK DOOR GLASS: REMOVAL
REMOVAL
1. REMOVE UPPER BACK WINDOW PANEL TRIM See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
2. REMOVE BACK DOOR PANEL TRIM ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
3. DISCONNECT POWER BACK DOOR ROD (w/ Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
4. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
5. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
6. REMOVE BACK DOOR TRIM COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
7. REMOVE REAR SPOILER ASSEMBLY See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Removal
8. REMOVE REAR WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper Motor/Removal
9. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper
Motor/Removal
10. REMOVE REAR WIPER MOTOR GROMMET See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper Motor/Removal
11. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear
Wiper Motor/Removal
12. REMOVE BACK DOOR GLASS
(a) Disconnect the 3 connectors.
(b) Apply protective tape to the outer surface of the vehicle body to prevent scratches.
Text in Illustration
NOTICE: When separating the back door glass from the vehicle, be careful not to damage the paint or interior and exterior ornaments.