Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2741002.png)
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
4. INSTALL BACK DOOR GLASS
(a) Using a brush, coat the installation surface on the vehicle body with Primer M.
NOTICE:
-
Do not coat the adhesive with Primer M.
-
Do not apply too much primer.
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Using a brush or a sponge, coat the application area of the adhesive with Primer G.
Standard Dimension:
