Venza FWD L4-2.7L (1AR-FE) (2009)
Front Door Window Regulator: Service and Repair
Removal
WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL
REMOVAL
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system
See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver
Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger
Side) See: Power Window Switch/Service and Repair/Front Passenger Side Power Window Switch/Removal
5. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Removal
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
7. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
8. REMOVE DOOR SIDE AIR BAG SENSOR See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag Sensor (for
Front Side)/Removal
9. REMOVE FRONT DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
11. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
12. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using a T25 "TORX" driver, remove the 3 screws and the front power window regulator motor assembly.