Venza FWD L4-2.7L (1AR-FE) (2009)
HINT: Use the same procedure for the RH side and LH side See: Body and Frame/Spoilers, Flaps, and Air Dams/Mud Flap/Service and
Repair/Removal.
3. REMOVE FRONT FENDER LINER RH
(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
(b) Remove the 4 clips.
(c) Remove the bolt and 8 screws.
(d) Remove the 3 grommets and front fender liner RH.
HINT: The grommets need to be replaced with new ones because they will break when they are removed.
4. DRAIN WINDSHIELD WASHER FLUID
(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
HINT: Use a container to collect the washer fluid.
5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY