Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Remove the nut and the front wiper arm and blade assembly RH.
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(a) Disengage the claw and 2 guides and remove the front fender to cowl side seal LH.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
HINT: Use the same procedure for the RH side and LH side.
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 13 claws and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY