Venza FWD L4-2.7L (1AR-FE) (2009)
(1) Clean the wiper pivot serrations with a wire brush.
Text in Illustration
(c) Install the front wiper arm and blade assembly LH with the nut to the position shown in the illustration.
Text in Illustration
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)
(d) Operate the front wipers while spraying washer fluid onto the windshield. Make sure that the front wipers function properly and the wipers do
not come into contact with the vehicle body.
8. INSTALL FRONT WIPER ARM HEAD CAP
(a) Install the 2 front wiper arm head caps.