toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 7263 > < Components|Page 7261
Page 2
background image

Use the same procedure for the RH side and LH side    See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.

19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.

20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

HINT
Use the same procedure for the RH side and LH side  
  See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear
Seat Outer Belt Assembly/Removal.

21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal

and Replacement/Removal

22. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.

23. REMOVE DOOR CONTROL RECEIVER

(a) Disconnect the connector.

(b) Remove the bolt and the door control receiver.

Components|Page 7263 > < Components|Page 7261