Venza FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
9. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Power Seat)/Installation.
10. INSTALL REAR INNER SEAT TRACK COVER RH (for Power Seat)
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Power Seat)/Installation.
11. INSTALL REAR OUTER SEAT TRACK COVER RH (for Power Seat)
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Power Seat)/Installation.
12. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Power Seat)
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Power Seat)/Installation.
13. INSPECT FRONT SEAT ASSEMBLY RH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat Assembly (for Power Seat)/Installation
14. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.