Venza FWD V6-3.5L (2GR-FE) (2010)
1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Engage the 3 claws to install the front No. 3 speaker assembly.
2. INSTALL FRONT PILLAR GARNISH CORNER PIECE (for 13 Speakers) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
(a) Connect the connector.
(b) Install the front No. 2 speaker assembly with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
4. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Connect the connector.
(b) Install the center speaker assembly with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)