Venza FWD V6-3.5L (2GR-FE) (2010)
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Disconnect each connector.
(b) Remove the 2 nuts and the certification ECU (smart key ECU assembly).
Installation
THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION
1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.
(b) Connect each connector.