Venza FWD V6-3.5L (2GR-FE) (2010)
Hood Sensor/Switch (For Alarm): Service and Repair
Installation
THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: INSTALLATION
1. INSTALL SECURITY COURTESY SWITCH
(a) Install the security courtesy switch with the 2 screws.
(b) Engage the clamp.
(c) Install the spring.
(d) Install the spring.
2. INSTALL HOOD LOCK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Installation
3. INSTALL HIGH PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/High Pitched Horn/Installation
4. INSTALL RADIATOR GRILLE SUB-ASSEMBLY See: Body and Frame/Grille/Service and Repair/Installation
5. INSTALL RADIATOR GRILLE PROTECTOR See: Body and Frame/Grille/Service and Repair/Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
7. INSPECT HOOD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Testing and Inspection
8. ADJUST HOOD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Adjustments