toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Rear Door Exterior Handle|Overhaul|Page 7726 > < Rear Door Exterior Handle|Overhaul|Page 7724
Page 15
background image

(a) Using a T30 "TORX" socket wrench, loosen the screw.

(b) Slide the rear door outside handle frame sub-assembly to disengage the door handle nut and claw of the rear door outside handle frame

sub-assembly, and then remove it.

29. REMOVE REAR DOOR PANEL PROTECTOR

(a) Disengage the 6 clips and remove the rear door panel protector.

30. REMOVE REAR DOOR BELT MOULDING   

31. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING   

32. REMOVE REAR DOOR REAR WINDOW FRAME MOULDING   

33. REMOVE REAR DOOR UPPER WINDOW FRAME MOULDING   

34. REMOVE REAR DOOR OUTSIDE STRIPE   

35. REMOVE REAR DOOR LOWER OUTSIDE STRIPE   

36. REMOVE NO. 2 BLACK OUT TAPE   

37. REMOVE REAR DOOR OUTSIDE MOULDING   See: Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair/Removal

Reassembly

DOOR / HATCH: REAR DOOR: REASSEMBLY

1. REPAIR INSTRUCTION   

Rear Door Exterior Handle|Overhaul|Page 7726 > < Rear Door Exterior Handle|Overhaul|Page 7724