Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2202022.png)
Text in Illustration
(c) Install the 2 screws.
(d) Tighten the temporary bolt and bolt to install the rear door window division bar sub-assembly.
(e) Install the hole plug.
24. INSTALL REAR DOOR GLASS RUN
(a) Install the rear door glass run.
25. INSTALL REAR DOOR WEATHERSTRIP
(a) Engage the 21 clips and install the rear door weatherstrip.
26. INSTALL REAR DOOR CHECK ASSEMBLY
(a) Apply MP grease to the sliding areas of the rear door check assembly.
