Venza FWD V6-3.5L (2GR-FE) (2010)
35. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
(a) for 13 Speakers:
(1) Connect the connector.
(b) Engage the 8 clips and install the rear door trim board sub-assembly.
(c) Install the 2 screws.
36. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
(a) Connect the connector.
(b) Engage the 2 clips and 5 claws, and install the rear power window regulator switch assembly with rear door armrest base panel.
37. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
(a) Engage the 3 claws and install the rear door inside handle bezel plug.