Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2214002.png)
Text in Illustration
HINT
Tape the screwdriver tip before use.
(b) Remove the 3 bolts.
(c) Disconnect the hood lock control cable and remove the hood lock assembly.
9. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
(a) Using a screwdriver, remove the hood lock nut cap.
Text in Illustration
HINT
Tape the screwdriver tip before use.
(b) Disconnect the connector.
