Venza FWD V6-3.5L (2GR-FE) (2010)
(b) Connect the hood lock control cable.
(c) Install the hood lock assembly with the 3 bolts.
[A] Centering Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
[A] Standard Bolt - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
[B] - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Install a new hood lock nut cap.
6. INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.