Venza FWD V6-3.5L (2GR-FE) (2010)
14. REMOVE NO. 2 BACK WINDOW GLASS SPACER
(a) Using a scraper, remove the No. 2 back window glass spacer.
NOTICE:
*
Be careful not to damage the back door glass.
*
Be sure to replace the No. 2 back window glass spacer with a new one.
15. REMOVE NO. 1 BACK WINDOW GLASS SPACER
HINT
Use the same procedure for the RH side and LH side.
16. CLEAN BACK DOOR GLASS
(a) Clean the outer edge of the back door glass with a non-residue solvent.
NOTICE:
*
Do not touch the back door glass surface after cleaning it.
*
Be careful not to damage the glass.
*
Even if using a new back door glass, clean the back door glass with a non-residue solvent.
17. CLEAN VEHICLE BODY
(a) Using a scraper, remove the moulding and adhesive from the back door glass.