Venza FWD V6-3.5L (2GR-FE) (2010)
Use the same procedure for the RH side and LH side.
4. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
5. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
(a) Remove the back door opener switch assembly.
Installation
DOOR / HATCH: BACK DOOR OPENER SWITCH: INSTALLATION
1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
(a) Install the back door opener switch assembly.
2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
3. INSTALL REAR LIGHT ASSEMBLY LH See: Lighting and Horns/Tail Lamp/Service and Repair/Removal and Replacement/Rear Light
Assembly/Installation
4. INSTALL REAR LIGHT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
5. INSTALL BACK DOOR PANEL TRIM ASSEMBLY See: Service and Repair/Reassembly