Venza FWD V6-3.5L (2GR-FE) (2010)
Trunk / Liftgate Switch: Service and Repair
Power Back Door Closer Switch
Components
DOOR / HATCH: POWER BACK DOOR CLOSER SWITCH: COMPONENTS
Removal
DOOR / HATCH: POWER BACK DOOR CLOSER SWITCH: REMOVAL
1. REMOVE BACK DOOR PANEL TRIM ASSEMBLY See: Service and Repair/Disassembly
2. REMOVE POWER BACK DOOR CLOSER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the 4 claws and remove the power back door closer switch assembly.
Installation
DOOR / HATCH: POWER BACK DOOR CLOSER SWITCH: INSTALLATION
1. INSTALL POWER BACK DOOR CLOSER SWITCH ASSEMBLY
(a) Engage the 4 claws to install the power back door closer switch assembly.
(b) Connect the connector.
2. INSTALL BACK DOOR PANEL TRIM ASSEMBLY See: Service and Repair/Reassembly