Venza FWD V6-3.5L (2GR-FE) (2010)
(b) Using a moulding remover, disengage the 2 claws.
NOTICE:
*
If reusing the emblem, take care not to damage the No. 1 back door emblem.
*
Be careful not to damage the vehicle body.
(c) Disengage the guide and remove the No. 1 back door emblem.
3. REMOVE NO. 2 BACK DOOR NAME PLATE
(a) Put protective tape around the No. 2 back door name plate.
Text in Illustration
(b) Using a moulding remover, peel off the double-sided tape to remove the No. 2 back door name plate.
NOTICE:
*
If reusing the name plate, take care not to damage the No. 2 back door name plate.
*
Be careful not to damage the vehicle body.
4. REMOVE NO. 3 BACK DOOR NAME PLATE
(a) Put protective tape around the No. 3 back door name plate.
Text in Illustration
(b) Using a moulding remover, peel off the double-sided tape to remove the No. 3 back door name plate.
NOTICE:
*
If reusing the name plate, take care not to damage the No. 3 back door name plate.
*
Be careful not to damage the vehicle body.