Venza FWD V6-3.5L (2GR-FE) (2010)
(d) Remove the 2 clips from the vehicle body.
HINT
Use the same procedure for the RH side and the LH side.
62. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Sliding Roof)
(a) Using a screwdriver, disengage the 6 claws and remove the 2 assist grip covers.
Text in Illustration
NOTICE:
Do not forcibly pry the assist grip covers to prevent them from being deformed.
HINT
Tape the screwdriver tip before use.
(b) Disengage the 4 clips and remove the assist grip sub-assembly.
(c) Remove the 4 clips from the vehicle body.
HINT
Use the same procedure for the RH side and the LH side.
63. REMOVE REAR ASSIST GRIP ASSEMBLY (w/ Sliding Roof)
(a) Using a screwdriver, disengage the 6 claws and remove the 2 assist grip covers.