Venza FWD V6-3.5L (2GR-FE) (2010)
18. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Connect the connector.
(b) Engage the 7 claws and the 5 clips.
(c) Install the deck trim side panel assembly LH with the bolt and clip.
19. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Installation
20. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)
(a) Engage the 2 guides.
(b) Install the 2 luggage hold belt striker assemblies with the 2 bolts.
21. INSTALL RECLINING REMOTE CONTROL BEZEL LH
(a) Engage the 3 claws to install the reclining remote control bezel LH.