Venza FWD V6-3.5L (2GR-FE) (2010)
(c) Install the upper center pillar garnish LH with the screw.
48. INSTALL LOWER CENTER PILLAR GARNISH LH
(a) Engage the guide, 2 claws and the 2 clips to install the lower center pillar garnish LH as shown in the illustration.
49. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat
Outer Belt Assembly/Installation
50. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side) See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front
Seat Outer Belt Assembly/Installation
51. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
(a) Align the alignment mark (Purple) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and
install the rear door opening trim weatherstrip LH.
Text in Illustration