Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Apply adhesive tape to the locations shown in the illustration.
HINT
As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.
5. INSTALL NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)
(a) Align the markings on the roof headlining assembly with the 2 No. 2 roof silencer pads and install the silencer pad using hot-melt glue or
double-sided tape as shown in the illustration.
6. INSTALL NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)
(a) w/o Rear Seat Entertainment System:
(1) Align the markings on the roof headlining assembly with the 3 No. 3 roof silencer pads and install the silencer pad using hot-melt glue or
double-sided tape as shown in the illustration.