Venza FWD V6-3.5L (2GR-FE) (2010)
Repair/Transmitter Battery (w/ Smart Key System).
NOTICE:
Do not wrap a lead wire around the terminal, wedge it between the terminals, or solder it. Terminal may be deformed or damaged,
and the battery will not be able to be installed correctly.
(b) Carefully pull the lead wire out from the position shown in the illustration and install the previously removed transmitter battery.
(c) Using an oscilloscope, check the transmitter battery voltage waveform.
HINT
When measuring the battery voltage, while operating the lock switch of a door outside handle assembly, bring the key within the entry
operating range to perform the measurement. For the entry operating range, refer to System Description See: Accessories and
Optional Equipment/Antitheft and Alarm Systems/Description and Operation/Smart Key System (for Entry Function).
Standard Voltage:
NG -- REPLACE TRANSMITTER BATTERY
OK -- Continue to next step.