Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2319001.png)
Power Door Lock Actuator: Testing and Inspection
Front Door Lock
DOOR LOCK: FRONT DOOR LOCK: INSPECTION
1. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Check the operation of the door lock motor.
(1) Apply battery voltage and check the operation of the door lock motor.
OK:
Text in Illustration
(2) If the result is not as specified, replace the front door lock assembly LH.
(b) Check the operation of the door unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.
