Venza FWD V6-3.5L (2GR-FE) (2010)
Seat Heater Control Module: Service and Repair
Installation
SEAT: SEAT HEATER CONTROL: INSTALLATION
1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY
(a) Engage the clamp and install the seat heater control sub-assembly.
(b) Connect the connector.
2. INSTALL FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
3. INSTALL FRONT SEAT REAR INNER TRACK COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
4. INSTALL FRONT SEAT REAR OUTER TRACK COVER See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
5. INSTALL FRONT SEAT HEADREST ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Installation
6. INSPECT FRONT SEAT ASSEMBLY See: Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Installation
7. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System