Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2483003.png)
(c) Disengage the 9 clips and remove the rear door outside moulding.
(d) Remove the 9 clips (No. 1 outside moulding clip) and outside moulding retainer from the rear door outside moulding.
4. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR See: Fender/Rear Fender/Service and Repair/Removal
5. REMOVE REAR ROCKER PANEL MOULDING END COVER
(a) Remove the 2 screws.
(b) Using a clip remover, remove the clip and rear rocker panel moulding end cover.
(c) Remove the 2 grommets from the rear rocker panel moulding end cover.
