Venza FWD V6-3.5L (2GR-FE) (2010)
(1) Using a heat light, heat the vehicle body and rear door outside moulding.
(2) Remove the release paper from the rear door outside moulding.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 9 clips and install the rear door outside moulding.
(f) Install the nut and hole plug.
4. INSTALL FRONT DOOR OUTSIDE MOULDING
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the front door outside moulding.
(1) Using a heat light, heat the front door outside moulding.