Venza FWD V6-3.5L (2GR-FE) (2010)
Torque : 29 Nm (300 kgf-cm, 22 ft-lbf)
HINT
Install the front flexible hose lock securely into the lock hole in the front disc brake cylinder assembly.
(b) Install the front flexible hose with a new clip.
NOTICE:
Install the clip as far as it will go.
(c) Using a union nut wrench, connect the brake line to the front flexible hose while holding the front flexible hose with a wrench.
Text in Illustration
Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)
NOTICE:
*
Do not kink or damage the brake line.
*
Do not allow brake line to twist and interfere with other parts or body during flexible hose tightening.
*
Do not allow any foreign matter such as dirt or dust to enter the brake line.
*
Use the formula to calculate special torque values for situations where union nut wrench is combined with a torque wrench See:
Service Precautions.
(d) Install the front flexible hose together with the speed sensor bracket to the absorber bracket with the bolt.