Venza FWD V6-3.5L (2GR-FE) (2010)
Parking Brake Cable: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION
1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Install the No. 3 parking brake cable assembly with the bolt and 4 nuts.
Nut (A) - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
Nut (B) - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
Bolt - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
(b) Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
2. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
Use the same procedure as for the No. 3 parking brake cable assembly.
3. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER