Venza FWD V6-3.5L (2GR-FE) (2010)
(c) Install the throttle body bracket and No. 1 surge tank stay with the 2 bolts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(d) Connect the connector to the intake air control valve assembly.
(e) Connect the 2 water by-pass hoses to the throttle body assembly.
(f) Connect the fuel vapor feed hose to the intake air surge tank assembly.
(g) Connect the throttle body assembly connector and wire harness clamp to the throttle body assembly.
(h) Connect the ventilation hose.