Venza FWD V6-3.5L (2GR-FE) (2010)
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
3. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and front blower motor sub-assembly.
Installation
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION
1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Install the front blower motor sub-assembly with the 3 screws.
(b) Connect the connector.
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.