Venza FWD V6-3.5L (2GR-FE) (2010)
Housing Assembly HVAC: Overhaul
Disassembly
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY
1. REMOVE TRANSPONDER KEY ECU ASSEMBLY (w/ Engine Immobiliser System) See: Accessories and Optional Equipment/Antitheft and
Alarm Systems/Alarm Module/Service and Repair/Transponder Key ECU/Removal
2. REMOVE NO. 1 FINISH PANEL MOUNTING BRACKET
(a) Remove the 2 bolts and 2 No. 1 finish panel mounting brackets as shown in the illustration.
3. REMOVE NO. 2 FINISH PANEL MOUNTING BRACKET
(a) Remove the bolt and No. 2 finish panel mounting bracket as shown in the illustration.
4. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
(a) Disengage the 2 claws and guide, and remove the No. 3 air duct sub-assembly as shown in the illustration.
5. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY
(a) Disengage the 2 claws and guide, and remove the No. 2 air duct sub-assembly as shown in the illustration.