Venza FWD V6-3.5L (2GR-FE) (2010)
(c) Remove the heater radiator unit sub-assembly as shown in the illustration.
NOTICE:
Prepare a drain pan or cloth in case the cooling water leaks.
16. REMOVE AIR OUTLET CONTROL SERVO MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and air outlet control servo motor sub-assembly.
Reassembly
HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: REASSEMBLY
1. INSTALL AIR OUTLET CONTROL SERVO MOTOR SUB-ASSEMBLY
(a) Install the air outlet control servo motor sub-assembly with the 3 screws.
2. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Install the heater radiator unit sub-assembly as shown in the illustration.