Venza FWD V6-3.5L (2GR-FE) (2010)
1. Cycle the ignition switch to the "IG-ON" position and push and hold the "AUTO" switch for 6 seconds until the zone number appears on the
compass display.
HINT
Pushing the "AUTO" switch for 3 seconds turns the compass display ON or OFF.
2. Push the "AUTO" switch to select the number of the zone where the vehicle is located.
See the map in Figure 3 for zone reference.
3. Start the engine and push and hold the "AUTO" switch for 9 seconds until "C" appears on the display.