Venza FWD V6-3.5L (2GR-FE) (2010)
27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
28. REMOVE REAR DOOR COURTESY LIGHT SWITCH
(a) Disconnect the rear door courtesy light switch connector.
(b) Using "TORX" socket wrench T30, remove the "TORX" bolt and rear door courtesy light switch.
Installation
LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL REAR DOOR COURTESY LIGHT SWITCH
(a) Using "TORX" socket wrench T30, install the rear door courtesy light switch with the "TORX" bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the rear door courtesy light switch connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
4. CONNECT REAR SEAT OUTER BELT ASSEMBLY See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer
Belt Assembly/Installation
5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
6. INSTALL RECLINING REMOTE CONTROL BEZEL See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
7. INSTALL REAR SEAT ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
8. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side) See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly (for LH Side)/Installation
9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation