Venza FWD V6-3.5L (2GR-FE) (2010)
Fuel Gauge Sender: Testing and Inspection
2GR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
1. INSPECT FUEL SENDER GAUGE
Text in Illustration
(a) Remove the fuel sender gauge.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between terminals 2 and 1 of the connector according to the value(s) in the table below.
Standard Resistance:
HINT
If the result is not as specified, replace the fuel sender gauge.
2. INSPECT FUEL SENDER GAUGE ASSEMBLY