toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headlamp Alignment Control Module|Service and Repair > < Diagram Information and Instructions|Page 9716
Page 1
background image

Headlamp Alignment Control Module: Testing and Inspection

LIGHTING (EXT): LIGHTING SYSTEM: PROBLEM SYMPTOMS TABLE

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are
listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are
listed. Replace parts as necessary.

Automatic Headlight Beam Level Control

NOTICE:
*

Initialize the headlight leveling ECU assembly after the vehicle height changes due to replacement of the suspension or after
performing such operations as removal and reinstallation or replacement of the rear height control sensor sub-assembly RH.

*

When the headlight leveling ECU assembly is replaced, the initialization is also necessary.

Headlamp Alignment Control Module|Service and Repair > < Diagram Information and Instructions|Page 9716