Venza FWD V6-3.5L (2GR-FE) (2010)
and Repair/Removal and Replacement/Removal
11. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
14. REMOVE POSITION INDICATOR HOUSING ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
15. REMOVE CONSOLE BOX SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
16. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Using a screwdriver, disengage the 2 claws and remove the power point socket assembly as shown in the illustration.
Text in Illustration
HINT
Tape the screwdriver tip before use.
17. REMOVE POWER POINT SOCKET COVER
(a) Disengage the 2 claws and remove the power point socket cover.
Installation
POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION
1. INSTALL POWER POINT SOCKET COVER
(a) Engage the 2 claws to install the power point socket cover.