Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-981037.png)
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CAN NO. 1 JUNCTION
CONNECTOR)
OK -- Continue to next step.
2. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - ECM)
(a) Disconnect the CAN No. 1 junction connector (A44).
Text in Illustration
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRE (ECM)
OK -- Continue to next step.
3. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - SKID CONTROL ECU)
(a) Disconnect the skid control ECU connector.
