toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3149 > < Initial Inspection and Diagnostic Overview|Page 3147
Page 44
background image

Text in Illustration

Text in Illustration

Result:

D --  REPLACE AIR CONDITIONING AMPLIFIER  See: Heating and Air Conditioning/Control Module HVAC/Service and
Repair/Removal

C --  REPLACE POWER MANAGEMENT CONTROL ECU  See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Removal

B --  REPLACE 4WD CONTROL ECU  
A -- Continue to next step.

10. CHECK FOR SHORT IN CAN BUS WIRES (4WD CONTROL ECU)

(a) Reconnect the 4WD control ECU connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

Text in Illustration

NG --  REPLACE 4WD CONTROL ECU  

OK --  REPLACE POWER MANAGEMENT CONTROL ECU  See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Removal

Initial Inspection and Diagnostic Overview|Page 3149 > < Initial Inspection and Diagnostic Overview|Page 3147